An experimental study of an optimized plain-jet airblast atomizer

Ronen Harari, Eran Sher

Research output: Contribution to journalConference articlepeer-review

Abstract

The relationship between the characteristics of a spray pattern that is generated by a simple external-mixing plain-jet atomizer, in pulse mode, and the control parameters of the injection system, has been investigated experimentally. The experimental conditions varied in the range of Re=1236 to 3540, We=65 to 595, and air/liquid velocity ratio from 15 to 110. The pulse duration varied between 3.4 and 18.5ms. It was found that, 1. the Sauter mean diameter is proportional to (Vf/Va3)0.5 over the entire range of operational conditions (within an error of ±7.5%), 2. a shorter pulse and a longer time interval between the pulses result in a smaller SMD, 3. the SMD may by decreased by some 25%, as compared to a continuous injection, when the pulse time duration reduces to 20% of the total cycle time, and 4. short time pulses and long interval between pulses, are always preferable to produce small droplets.

Original languageEnglish
JournalSAE Technical Papers
DOIs
StatePublished - 1 Jan 1996
EventInternational Congress and Exposition - Detroit, MI, United States
Duration: 26 Feb 199629 Feb 1996

Fingerprint

Dive into the research topics of 'An experimental study of an optimized plain-jet airblast atomizer'. Together they form a unique fingerprint.

Cite this