Attrition control by pneumatic conveying

H. Kalman

doi:10.1016/S0032-5910(99)00097-2

Attrition control by pneumatic conveying

H. Kalman

Department of Mechanical Engineering

Research output: Contribution to journal › Article › peer-review

59 Scopus citations

Abstract

Attrition is usually considered as an undesired process. Therefore, many researchers devoted their work to find ways for reducing the attrition. However, attrition might be controlled by understanding the parameters and mechanisms affecting it. The control could be realized by reducing the attrition, increasing it, or conducing a selective attrition that will change the particle's shape. In this paper, the attrition mechanism is explained and analyzed. Possible ways, to either increase or decrease the attrition, are described. Experimental results of a new system for selective attrition are shown in more details. Copyright (C) 1999 Elsevier Science S.A.

Original language	English
Pages (from-to)	214-220
Number of pages	7
Journal	Powder Technology
Volume	104
Issue number	3
DOIs	https://doi.org/10.1016/S0032-5910(99)00097-2
State	Published - 1 Oct 1999

Keywords

Attrition
Comminution
Pneumatic conveying

ASJC Scopus subject areas

General Chemical Engineering

Access to Document

10.1016/S0032-5910(99)00097-2

Cite this

@article{b7d0bd210fb54f00b018120c6e38b687,

title = "Attrition control by pneumatic conveying",

abstract = "Attrition is usually considered as an undesired process. Therefore, many researchers devoted their work to find ways for reducing the attrition. However, attrition might be controlled by understanding the parameters and mechanisms affecting it. The control could be realized by reducing the attrition, increasing it, or conducing a selective attrition that will change the particle's shape. In this paper, the attrition mechanism is explained and analyzed. Possible ways, to either increase or decrease the attrition, are described. Experimental results of a new system for selective attrition are shown in more details. Copyright (C) 1999 Elsevier Science S.A.",

keywords = "Attrition, Comminution, Pneumatic conveying",

author = "H. Kalman",

note = "Funding Information: This research was supported in part by The Israel Science Foundation founded by the Israel Academy of Sciences and Humanities.",

year = "1999",

month = oct,

day = "1",

doi = "10.1016/S0032-5910(99)00097-2",

language = "English",

volume = "104",

pages = "214--220",

journal = "Powder Technology",

issn = "0032-5910",

publisher = "Elsevier B.V.",

number = "3",

}

TY - JOUR

T1 - Attrition control by pneumatic conveying

AU - Kalman, H.

N1 - Funding Information: This research was supported in part by The Israel Science Foundation founded by the Israel Academy of Sciences and Humanities.

PY - 1999/10/1

Y1 - 1999/10/1

N2 - Attrition is usually considered as an undesired process. Therefore, many researchers devoted their work to find ways for reducing the attrition. However, attrition might be controlled by understanding the parameters and mechanisms affecting it. The control could be realized by reducing the attrition, increasing it, or conducing a selective attrition that will change the particle's shape. In this paper, the attrition mechanism is explained and analyzed. Possible ways, to either increase or decrease the attrition, are described. Experimental results of a new system for selective attrition are shown in more details. Copyright (C) 1999 Elsevier Science S.A.

AB - Attrition is usually considered as an undesired process. Therefore, many researchers devoted their work to find ways for reducing the attrition. However, attrition might be controlled by understanding the parameters and mechanisms affecting it. The control could be realized by reducing the attrition, increasing it, or conducing a selective attrition that will change the particle's shape. In this paper, the attrition mechanism is explained and analyzed. Possible ways, to either increase or decrease the attrition, are described. Experimental results of a new system for selective attrition are shown in more details. Copyright (C) 1999 Elsevier Science S.A.

KW - Attrition

KW - Comminution

KW - Pneumatic conveying

UR - http://www.scopus.com/inward/record.url?scp=0032586194&partnerID=8YFLogxK

U2 - 10.1016/S0032-5910(99)00097-2

DO - 10.1016/S0032-5910(99)00097-2

M3 - Article

AN - SCOPUS:0032586194

SN - 0032-5910

VL - 104

SP - 214

EP - 220

JO - Powder Technology

JF - Powder Technology

IS - 3

ER -

Attrition control by pneumatic conveying

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this