Bonding of TRIP-steel/Al2O3-(3Y)-TZP composites and (3Y)-TZP ceramic by a spark plasma sintering (SPS) apparatus

Aslan Miriyev, Steffen Grützner, Lutz Krüger, Sergey Kalabukhov, Nachum Frage

Research output: Contribution to journalArticlepeer-review

6 Scopus citations

Abstract

A combination of the high damage tolerance of TRIP-steel and the extremely low thermal conductivity of partially stabilized zirconia (PSZ) can provide controlled thermal-mechanical properties to sandwich-shaped composite specimens comprising these materials. Sintering the (TRIP-steel-PSZ)/PSZ sandwich in a single step is very difficult due to differences in the sintering temperature and densification kinetics of the composite and the ceramic powders. In the present study, we successfully applied a two-step approach involving separate SPS consolidation of pure (3Y)-TZP and composites containing 20 vol % TRIP-steel, 40 vol % Al2O3 and 40 vol % (3Y)-TZP ceramic phase, and subsequent diffusion joining of both sintered components in an SPS apparatus. The microstructure and properties of the sintered and bonded specimens were characterized. No defects at the interface between the TZP and the composite after joining in the 1050-1150 °C temperature range were observed. Only limited grain growth occurred during joining, while crystallite size, hardness, shear strength and the fraction of the monoclinic phase in the TZP ceramic virtually did not change. The slight increase of the TZP layer's fracture toughness with the joining temperature was attributed to the effect of grain size on transformation toughening.

Original languageEnglish
Article number558
JournalMaterials
Volume9
Issue number7
DOIs
StatePublished - 1 Jan 2016

Keywords

  • Fracture toughness
  • Hardness
  • Partially stabilized zirconia (PSZ)
  • Phase transformation
  • Shear strength
  • Solid state bonding
  • Spark plasma sintering (SPS)
  • TRIP steel
  • Yttria-stabilized tetragonal zirconia polycrystal ((3Y)-TZP)

Fingerprint

Dive into the research topics of 'Bonding of TRIP-steel/Al<sub>2</sub>O<sub>3</sub>-(3Y)-TZP composites and (3Y)-TZP ceramic by a spark plasma sintering (SPS) apparatus'. Together they form a unique fingerprint.

Cite this