Bromide removal from chloride solutions by combined electrolysis and anion exchange processes

Emanuel Korngold, Ludmila Aronov, Tony Tuvia Bejerano

Research output: Contribution to journalArticlepeer-review

Abstract

Selective bromide removal from chloride solution was carried out by combined electrolysis and anion exchange processes. First the bromide was oxidized to bromine in an electrolysis cell. Then Br2 was combined with Br– and or Cl– to form complex anions (Brx Cly– ) mainly as Br3–, Br2Cl– or BrCl2– that have high selectivity to anion exchange resins. The results showed that the separation factor of Br increased from 2.5 when Br– was not oxidized to about 30–50 when oxidation was applied. Moreover, the total Br capacity increased from about 3 to more than 9 meq. Br/g. The Br capacity of the resin depends on chloride and bromide concentrations in solution, probably because they influence the transition of Br3 to Br2Cl and to BrCl2 . Regeneration occurred after reducing the bromine with NaHSO3 to bromide. The concentration of bromide in the column regeneration solution was about hundred times higher than in the feed solution.

Original languageEnglish
Pages (from-to)6-10
Number of pages5
JournalDesalination and Water Treatment
Volume113
DOIs
StatePublished - 1 May 2018

Keywords

  • Anion-exchange
  • Br removal
  • Disinfection
  • Trihalomethane

Fingerprint

Dive into the research topics of 'Bromide removal from chloride solutions by combined electrolysis and anion exchange processes'. Together they form a unique fingerprint.

Cite this