Corrigendum to “Fabrication of composite nanofiltration membrane by incorporating attapulgite nanorods during interfacial polymerization for high water flux and antifouling property” [J. Membr. Sci. 544 (2017) 79–87] (Journal of Membrane Science (2019) 592, (S0376738819317314), (10.1016/j.memsci.2019.117396))

Mengyuan Wu; Tianyi Ma; Yanlei Su; Hong Wu; Xinda You; Zhongyi Jiang; Roni Kasher

doi:10.1016/j.memsci.2021.119084

Corrigendum to “Fabrication of composite nanofiltration membrane by incorporating attapulgite nanorods during interfacial polymerization for high water flux and antifouling property” [J. Membr. Sci. 544 (2017) 79–87] (Journal of Membrane Science (2019) 592, (S0376738819317314), (10.1016/j.memsci.2019.117396))

Mengyuan Wu
, Tianyi Ma
, Yanlei Su
, Hong Wu
, Xinda You
, Zhongyi Jiang
, Roni Kasher

Zuckerberg Institute for Water Research

Research output: Contribution to journal › Comment/debate

Abstract

The horizontal axis label of Fig. 10 in the original version of the paper was incorrectly published because of wrong unit conversion. The correct version of Fig. 10 is given below. The correction does not change the conclusions of the work. The authors would like to apologize for not correcting the horizontal axis label of Fig. 10 in the original version of the paper.

Original language	English
Article number	119084
Journal	Journal of Membrane Science
Volume	623
DOIs	https://doi.org/10.1016/j.memsci.2021.119084
State	Published - 1 Apr 2021

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 6 Clean Water and Sanitation

ASJC Scopus subject areas

Biochemistry
General Materials Science
Physical and Theoretical Chemistry
Filtration and Separation

Access to Document

10.1016/j.memsci.2021.119084

Fingerprint

Dive into the research topics of 'Corrigendum to “Fabrication of composite nanofiltration membrane by incorporating attapulgite nanorods during interfacial polymerization for high water flux and antifouling property” [J. Membr. Sci. 544 (2017) 79–87] (Journal of Membrane Science (2019) 592, (S0376738819317314), (10.1016/j.memsci.2019.117396))'. Together they form a unique fingerprint.

Cite this

Wu, M., Ma, T., Su, Y., Wu, H., You, X., Jiang, Z., & Kasher, R. (2021). Corrigendum to “Fabrication of composite nanofiltration membrane by incorporating attapulgite nanorods during interfacial polymerization for high water flux and antifouling property” [J. Membr. Sci. 544 (2017) 79–87] (Journal of Membrane Science (2019) 592, (S0376738819317314), (10.1016/j.memsci.2019.117396)). Journal of Membrane Science, 623, Article 119084. https://doi.org/10.1016/j.memsci.2021.119084

Wu, Mengyuan ; Ma, Tianyi ; Su, Yanlei et al. / Corrigendum to “Fabrication of composite nanofiltration membrane by incorporating attapulgite nanorods during interfacial polymerization for high water flux and antifouling property” [J. Membr. Sci. 544 (2017) 79–87] (Journal of Membrane Science (2019) 592, (S0376738819317314), (10.1016/j.memsci.2019.117396)). In: Journal of Membrane Science. 2021 ; Vol. 623.

@article{9050651ec573446285a18f60ccfb0c5a,

title = "Corrigendum to “Fabrication of composite nanofiltration membrane by incorporating attapulgite nanorods during interfacial polymerization for high water flux and antifouling property” [J. Membr. Sci. 544 (2017) 79–87] (Journal of Membrane Science (2019) 592, (S0376738819317314), (10.1016/j.memsci.2019.117396))",

abstract = "The horizontal axis label of Fig. 10 in the original version of the paper was incorrectly published because of wrong unit conversion. The correct version of Fig. 10 is given below. The correction does not change the conclusions of the work. The authors would like to apologize for not correcting the horizontal axis label of Fig. 10 in the original version of the paper.",

author = "Mengyuan Wu and Tianyi Ma and Yanlei Su and Hong Wu and Xinda You and Zhongyi Jiang and Roni Kasher",

note = "Publisher Copyright: {\textcopyright} 2021 Elsevier B.V.",

year = "2021",

month = apr,

day = "1",

doi = "10.1016/j.memsci.2021.119084",

language = "English",

volume = "623",

journal = "Journal of Membrane Science",

issn = "0376-7388",

publisher = "Elsevier B.V.",

}

Wu, M, Ma, T, Su, Y, Wu, H, You, X, Jiang, Z & Kasher, R 2021, 'Corrigendum to “Fabrication of composite nanofiltration membrane by incorporating attapulgite nanorods during interfacial polymerization for high water flux and antifouling property” [J. Membr. Sci. 544 (2017) 79–87] (Journal of Membrane Science (2019) 592, (S0376738819317314), (10.1016/j.memsci.2019.117396))', Journal of Membrane Science, vol. 623, 119084. https://doi.org/10.1016/j.memsci.2021.119084

Corrigendum to “Fabrication of composite nanofiltration membrane by incorporating attapulgite nanorods during interfacial polymerization for high water flux and antifouling property” [J. Membr. Sci. 544 (2017) 79–87] (Journal of Membrane Science (2019) 592, (S0376738819317314), (10.1016/j.memsci.2019.117396)). / Wu, Mengyuan; Ma, Tianyi; Su, Yanlei et al.
In: Journal of Membrane Science, Vol. 623, 119084, 01.04.2021.

Research output: Contribution to journal › Comment/debate

TY - JOUR

T1 - Corrigendum to “Fabrication of composite nanofiltration membrane by incorporating attapulgite nanorods during interfacial polymerization for high water flux and antifouling property” [J. Membr. Sci. 544 (2017) 79–87] (Journal of Membrane Science (2019) 592, (S0376738819317314), (10.1016/j.memsci.2019.117396))

AU - Wu, Mengyuan

AU - Ma, Tianyi

AU - Su, Yanlei

AU - Wu, Hong

AU - You, Xinda

AU - Jiang, Zhongyi

AU - Kasher, Roni

PY - 2021/4/1

Y1 - 2021/4/1

N2 - The horizontal axis label of Fig. 10 in the original version of the paper was incorrectly published because of wrong unit conversion. The correct version of Fig. 10 is given below. The correction does not change the conclusions of the work. The authors would like to apologize for not correcting the horizontal axis label of Fig. 10 in the original version of the paper.

AB - The horizontal axis label of Fig. 10 in the original version of the paper was incorrectly published because of wrong unit conversion. The correct version of Fig. 10 is given below. The correction does not change the conclusions of the work. The authors would like to apologize for not correcting the horizontal axis label of Fig. 10 in the original version of the paper.

UR - https://www.scopus.com/pages/publications/85099704677

U2 - 10.1016/j.memsci.2021.119084

DO - 10.1016/j.memsci.2021.119084

M3 - Comment/debate

AN - SCOPUS:85099704677

SN - 0376-7388

VL - 623

JO - Journal of Membrane Science

JF - Journal of Membrane Science

M1 - 119084

ER -

Wu M, Ma T, Su Y, Wu H, You X, Jiang Z et al. Corrigendum to “Fabrication of composite nanofiltration membrane by incorporating attapulgite nanorods during interfacial polymerization for high water flux and antifouling property” [J. Membr. Sci. 544 (2017) 79–87] (Journal of Membrane Science (2019) 592, (S0376738819317314), (10.1016/j.memsci.2019.117396)). Journal of Membrane Science. 2021 Apr 1;623:119084. doi: 10.1016/j.memsci.2021.119084