Cutting force excursion in turning

E. Kushnir; V. T. Portman; A. Aguilar; W. Clark

doi:10.1016/j.procir.2023.06.085

Cutting force excursion in turning

E. Kushnir, V. T. Portman, A. Aguilar, W. Clark

Department of Mechanical Engineering

Research output: Contribution to journal › Conference article › peer-review

Abstract

A new model of cutting force formation in turning is investigated. In this model, the cutting area is shaped as a result of displacements of the undeformed blade points projections at the cutting plane. Extreme kinematics cases of turning are compared. In a cylinder turning, the feed rate fluctuates perpendicular to the plane of rotation, and the cutting force excursion depends on the ratio of the rotation to vibration frequencies. Contrary to this, in a facing, the feed rate varies in the plane of rotation, and the cutting force is not modulated. The theoretical results accord well with experimental data.

Original language	English
Pages (from-to)	495-500
Number of pages	6
Journal	Procedia CIRP
Volume	118
DOIs	https://doi.org/10.1016/j.procir.2023.06.085
State	Published - 1 Jan 2023
Event	16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2022 - Naples, Italy Duration: 13 Jul 2022 → 15 Jul 2022

Keywords

cutting model
error of motion
experimental time-series
force modulation
turning

ASJC Scopus subject areas

Control and Systems Engineering
Industrial and Manufacturing Engineering

Access to Document

10.1016/j.procir.2023.06.085

Cite this

@article{d376a7d6174644eab5e2705122be6950,

title = "Cutting force excursion in turning",

abstract = "A new model of cutting force formation in turning is investigated. In this model, the cutting area is shaped as a result of displacements of the undeformed blade points projections at the cutting plane. Extreme kinematics cases of turning are compared. In a cylinder turning, the feed rate fluctuates perpendicular to the plane of rotation, and the cutting force excursion depends on the ratio of the rotation to vibration frequencies. Contrary to this, in a facing, the feed rate varies in the plane of rotation, and the cutting force is not modulated. The theoretical results accord well with experimental data.",

keywords = "cutting model, error of motion, experimental time-series, force modulation, turning",

author = "E. Kushnir and Portman, {V. T.} and A. Aguilar and W. Clark",

note = "Publisher Copyright: {\textcopyright} 2023 Elsevier B.V.. All rights reserved.; 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2022 ; Conference date: 13-07-2022 Through 15-07-2022",

year = "2023",

month = jan,

day = "1",

doi = "10.1016/j.procir.2023.06.085",

language = "English",

volume = "118",

pages = "495--500",

journal = "Procedia CIRP",

issn = "2212-8271",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Cutting force excursion in turning

AU - Kushnir, E.

AU - Portman, V. T.

AU - Aguilar, A.

AU - Clark, W.

PY - 2023/1/1

Y1 - 2023/1/1

N2 - A new model of cutting force formation in turning is investigated. In this model, the cutting area is shaped as a result of displacements of the undeformed blade points projections at the cutting plane. Extreme kinematics cases of turning are compared. In a cylinder turning, the feed rate fluctuates perpendicular to the plane of rotation, and the cutting force excursion depends on the ratio of the rotation to vibration frequencies. Contrary to this, in a facing, the feed rate varies in the plane of rotation, and the cutting force is not modulated. The theoretical results accord well with experimental data.

AB - A new model of cutting force formation in turning is investigated. In this model, the cutting area is shaped as a result of displacements of the undeformed blade points projections at the cutting plane. Extreme kinematics cases of turning are compared. In a cylinder turning, the feed rate fluctuates perpendicular to the plane of rotation, and the cutting force excursion depends on the ratio of the rotation to vibration frequencies. Contrary to this, in a facing, the feed rate varies in the plane of rotation, and the cutting force is not modulated. The theoretical results accord well with experimental data.

KW - cutting model

KW - error of motion

KW - experimental time-series

KW - force modulation

KW - turning

UR - http://www.scopus.com/inward/record.url?scp=85173582908&partnerID=8YFLogxK

U2 - 10.1016/j.procir.2023.06.085

DO - 10.1016/j.procir.2023.06.085

M3 - Conference article

AN - SCOPUS:85173582908

SN - 2212-8271

VL - 118

SP - 495

EP - 500

JO - Procedia CIRP

JF - Procedia CIRP

T2 - 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2022

Y2 - 13 July 2022 through 15 July 2022

ER -

Cutting force excursion in turning

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this