Design and control of capstan-pulley draw system for optical fiber manufacturing

Hodge E. Jenkins, Mark L. Nagurka

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

Abstract

Optical fiber for data communication is manufactured by the draw process, which involves heating and pulling high purity glass cylinders to diameters of 125 μm. The diameter of the glass fiber and its light-guide core must remain constant to create a product capable of transmitting high-bandwidth optical data. The draw capstan design has a significant impact on the optical fiber quality. As the draw speed is used to control the fiber diameter, the ability of the draw capstan to follow velocity commands directly affects the resulting fiber diameter. To improve the control of the optical fiber diameter, the design of the overall system was revisited. A lumped-parameter model of the capstan drive was developed. It accounts for disturbances in the draw process that arise from sources such as the variation in the diameter of the input glass cylinder and the draw tension control, affecting the glass temperature and viscosity. The selection of the motor and the design of the speed controller in the optical fiber draw capstan pulley system were studied. Simulation studies over a range of parameters demonstrate that speed regulation, necessary to manufacture optical fiber within allowable diameter tolerances, can be achieved in the presence of estimated process disturbances without motor current saturation. The model predictions suggest that an effective draw capstan system can be synthesized and controlled. This case study has broad applications for the design of practical engineering systems that include control, electrical, and mechanical subsystems, typical in modern manufacturing. The paper highlights the use of mechanical and electrical modeling, system identification, and control design as necessary parts of product and process improvement.

Original languageEnglish
Title of host publication2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis
Pages471-478
Number of pages8
StatePublished - 21 Sep 2009
Externally publishedYes
Event2008 9th Biennial Conference on Engineering Systems Design and Analysis - Haifa, Israel
Duration: 7 Jul 20089 Jul 2008

Publication series

Name2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis
Volume2

Conference

Conference2008 9th Biennial Conference on Engineering Systems Design and Analysis
Country/TerritoryIsrael
CityHaifa
Period7/07/089/07/08

ASJC Scopus subject areas

  • Computational Mechanics
  • Control and Systems Engineering
  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Design and control of capstan-pulley draw system for optical fiber manufacturing'. Together they form a unique fingerprint.

Cite this