Detailed analysis of kinetic and fluid dynamic processes in diode-pumped alkali lasers

Research output: Contribution to journalArticlepeer-review

100 Scopus citations

Abstract

Kinetic and fluid dynamic processes in diode-pumped alkali lasers (DPALs) are analyzed in detail using a simple, semi-analytical model, applicable to both static and flowing-gas devices. Unlike other models, it takes into account the effects of temperature rise, excitation of neutral alkali atoms to high lying electronic states and their losses due to ionization and chemical reactions, resulting in a decrease in pump absorption, slope efficiency, and lasing power. Effects of natural convection in static DPALs are also taken into account. The applicability of the model is demonstrated in Cs DPALs by (1) obtaining good agreement with measurements in static [Electron. Lett. 44, 582 (2008)] and flowing-gas [Quantum Electron. 42, 95 (2012)] DPALs, (2) predicting the dependence of power on the flow velocity in flowing-gas DPALs, and (3) checking the effect of using a buffer gas with high molar heat capacity and a large relaxation rate constant between the 2P3/2 and 2P1/2 fine-structure levels of the alkali atom. The power strongly increases with flow velocity and by replacing, e.g., ethane by propane as a buffer gas, the power may be further increased by up to 30%; 7 kW is achievable in a small-scale laser with 10 cm3 of propane for a 20 kW pump at a flow velocity of 20 m/s..

Original languageEnglish
Pages (from-to)1118-1126
Number of pages9
JournalJournal of the Optical Society of America B: Optical Physics
Volume30
Issue number5
DOIs
StatePublished - 1 Jan 2013

ASJC Scopus subject areas

  • Statistical and Nonlinear Physics
  • Atomic and Molecular Physics, and Optics

Fingerprint

Dive into the research topics of 'Detailed analysis of kinetic and fluid dynamic processes in diode-pumped alkali lasers'. Together they form a unique fingerprint.

Cite this