Disperse-and-mix: Oil as an ‘entrance door’ of carbon-based fillers to rubber composites

Gal Shachar Michaely, Dimitry Alhazov, Michael Genkin, Matat Buzaglo, Oren Regev

Research output: Contribution to journalArticlepeer-review

3 Scopus citations


Oil was employed as an ‘entrance door’ for loading rubber with carbon-based fillers of different size and dimensionalities: 1D carbon nanotubes (CNTs), 2D graphene nanoplatelets (GNPs), and 3D graphite. This approach was explored, as a proof of concept, in the preparation of tire tread, where oil is commonly used to reduce the viscosity of the composite mixture. Rubber was loaded with carbon black (CB, always used) and one or more of the above fillers to enhance the thermal and mechanical properties of the composite. The CNT-loaded system showed the best enhancement in mechanical properties, followed by the CNT-GNP one. Rubber loaded with both graphite and GNP showed the best enhancement in thermal conductivity (58%). The overall en-hancements in both mechanical and thermal properties of the various systems were analyzed through an overall relative efficiency index in which the total filler concentration in the system is also included. According to this index, the CNT-loaded system is the most efficient one. The oil as an ‘entrance door’ is an easy and effective novel approach for loading fillers that are in the nanoscale and provide high enhancement of properties at low filler concentrations.

Original languageEnglish
Article number3048
Issue number11
StatePublished - 1 Nov 2021


  • Composites
  • Filler
  • Mechanical properties
  • Rubber
  • Scanning electron microscopy
  • Thermal conductivity

ASJC Scopus subject areas

  • General Chemical Engineering
  • General Materials Science


Dive into the research topics of 'Disperse-and-mix: Oil as an ‘entrance door’ of carbon-based fillers to rubber composites'. Together they form a unique fingerprint.

Cite this