Effective porosity, producible fluid and permeability in carbonates from NMR logging

Dahai Chang, Harold Vinegar, Chris Morriss, Chris Straley

Research output: Contribution to conferencePaperpeer-review


Producibility estimates in carbonate formations have always been a challenge for log interpretation. Broad pore size distributions in carbonates, from microcrystalline to large vugs, have a large effect on productivity, permeability, and estimation of hydrocarbon saturation from resistivity logs. In mixed complex carbonates it is even difficult to obtain accurate porosities from conventional wireline logs without calibration against core. An experimental logging tool, the CMR Combinable Magnetic Resonance tool, has been evaluated in the Glorieta and Clearfork carbonates in West Texas. The logged interval is complicated by significant amounts of separated vuggy porosity. The lithologies consist of dolomite, limestone, anhydrite and clastic material (silt containing quartz, feldspar and clay). The CMR porosity is derived independent of formation lithology. In the clean mixed carbonates, the CMR porosity is equal to total porosity. In the silt zones, the CMR porosity measures the effective porosity because it is insensitive to microporosity associated with the clastic material. Using the CMR free fluid porosity, the producing oil-water contact was identified in this well, which was difficult to determine using the conventional wireline logs alone. Twenty-seven core plugs from the well were analyzed by low field NMR (nuclear magnetic resonance) and conventional core analysis. Estimates of producible fluid obtained from the T2 distributions using a free fluid cutoff of 92 milliseconds agreed with centrifugeable fluid from the plugs. Petrophysical properties depending on the relative amounts of intergranular and vuggy porosity were found to be well correlated with the long end of the NMR T2 distributions. Permeability estimation from the porosity with T2 < 750 msec using the relation k ∼ π4 T2 was superior to that based on total porosity. Finally, the cementation exponent m was found to increase with the fraction of long T2 porosity.

Original languageEnglish
StatePublished - 1 Jan 1994
Externally publishedYes
EventSPWLA 35th Annual Logging Symposium 1994 - Tulsa, United States
Duration: 19 Jun 199422 Jun 1994


ConferenceSPWLA 35th Annual Logging Symposium 1994
Country/TerritoryUnited States

ASJC Scopus subject areas

  • Geotechnical Engineering and Engineering Geology
  • Energy Engineering and Power Technology


Dive into the research topics of 'Effective porosity, producible fluid and permeability in carbonates from NMR logging'. Together they form a unique fingerprint.

Cite this