Abstract
Phase change materials (PCMs) enable efficient transient thermal management due to their high latent heat of fusion. However, the relatively low PCM thermal conductivity limits heat transfer and power density of PCM-based approaches. Another key challenge is the buildup of a thick melt layer, which reduces heat transfer over time. Dynamic PCMs (dynPCMs) address the melt layer challenge by pumping away the liquid PCM as it melts to maintain a thin melt layer. This paper investigates the heat transfer and flow physics of dynPCM cooling on high thermal conductivity copper extended surface heat sinks. Extensive thermal and optical measurements coupled with high fidelity 3D numerical modeling are used to evaluate the performance of dynPCM on finned surfaces and understand the underlying heat transfer and flow physics. The study explores a range of operating conditions, applied power (35–70 W) and added mass (0–1.5 kg), for three copper heat sinks, two finned and one flat. Measurement results show that dynPCM on the finned sinks lower the thermal resistance by up to 45 % when compared to the flat sample. At 70 W applied power and any added mass, the finned sinks have an average of 4.4 °C lower steady state temperature when compared to the flat heat sink. The 3D modeling shows that the highest heat fluxes occur at the tips of the fins near the center of the heat sink where the melt layer is thinnest and away from where the liquid PCM drains out. This work details the effect of extended surfaces on dynPCM thermal management and shows the potential for further performance enhancement of dynPCM approaches based on gained fundamental understanding of governing mechanisms.
| Original language | English |
|---|---|
| Article number | 127950 |
| Journal | International Journal of Heat and Mass Transfer |
| Volume | 256 |
| DOIs | |
| State | Published - 1 Mar 2026 |
Keywords
- Close-contact melting
- Cooling
- Enhanced surface
- Heat sink
- Phase change materials
- Simulation
- Thermal management
- Visualization
ASJC Scopus subject areas
- Condensed Matter Physics
- Mechanical Engineering
- Fluid Flow and Transfer Processes
Fingerprint
Dive into the research topics of 'Experimental and numerical exploration of dynamic phase change materials on rectangular strip fins'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver