EXTRUSION OF CONCENTRATED CELLULOSIC/POLYMER SLURRIES.

D. H. White, D. Wolf

Research output: Contribution to conferencePaperpeer-review

Abstract

It has been proven experimentally and theoretically that an extruder is a good conveyor of solids, as long as the friction of the solids on the screw surface is not excessively greater than the friction of the solids on the barrel surface. This was known from early screw extruder history, but was put in a much more clearly-understood model by Tadmor and Klein. The helical geometry of the screw results in a ″plug of solids″ moving down the channel, due both to an axial translation and rigid rotation. In addition, the frictional force that the barrel exerts on the solids plug is composed of axial and tangential components. In the reported experiments, Douglas Fir sawdust as well as Ponderosa Pine sawdust sherries were used to study the transportation effectiveness of extruders. Effect of various process variables on extruder performance was determined. Extensive experimental data are plotted and evaluated. It is demonstrated that rheological properties due to the physical and chemical characteristics of the solids are important factors.

Original languageEnglish
Pages53-56
Number of pages4
StatePublished - 1 Jan 1980
EventSoc Plast Eng Tech Pap Annu Tech Conf, 38th, Plast Prog Through Process - New York, NY, USA
Duration: 5 May 19808 May 1980

Conference

ConferenceSoc Plast Eng Tech Pap Annu Tech Conf, 38th, Plast Prog Through Process
CityNew York, NY, USA
Period5/05/808/05/80

Fingerprint

Dive into the research topics of 'EXTRUSION OF CONCENTRATED CELLULOSIC/POLYMER SLURRIES.'. Together they form a unique fingerprint.

Cite this