First studies on cascaded dual-phase liquid hole-multipliers in xenon

Challenges in scaling up noble-liquid time projection chambers prompted the exploration of new detection concepts. The liquid hole-multiplier (LHM) was introduced as a potential component, enabling the detection of ionization electrons and VUV photons. Prior studies focused on perforated electrodes coated with CsI immersed in the liquid and electroluminescence amplification produced on a bubble trapped underneath. However, the performance was hindered by electron transfer across the liquid-gas interface. Here, we explored a bubble-free variant, placing a CsI-coated Thick Gas Electron Multiplier electrode below the liquid-gas interface to improve the transfer efficiency across it. Results show >5-fold improvement in the S1’/S2 ratio (a proxy for the photon detection efficiency (PDE)) compared to the bubble-assisted LHM. Although the achieved PDE is still below expectation (∼4%), we propose potential improvements to enhance the performance of this detector.