Five-parameter model of photovoltaic cell based on STC data and dimensionless

Simon Lineykin; Moshe Averbukh; Alon Kuperman

doi:10.1109/EEEI.2012.6377079

Five-parameter model of photovoltaic cell based on STC data and dimensionless

Simon Lineykin
, Moshe Averbukh
, Alon Kuperman

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

42 Scopus citations

Abstract

This paper offers a novel approach of the 'singlediode' equivalent circuit model estimation, which is based on analysis of the characteristics of the solar panel supplied by the manufacturer. The method combines solution of a system of algebraic equations with optimization algorithm for extracting the seven photovoltaic module parameters of the single diode lumped circuit model. These parameters are the photocurrent, the reverse bias saturation current, the ideality factor, the series resistance, the shunt resistance, the bandgap energy, and the temperature coefficient of the photo-generating current. A minimal set of experimental data is required for parameter extraction. In many cases, the required parameters can be extracted directly from the manufacturer's data. The number of solar panels of different types of manufacturers were analyzed. All the models have been obtained from the manufacturer's data only. The precision of simulation results is about 0.1%-0.5% for STC.

Original language	English
Title of host publication	2012 IEEE 27th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2012
DOIs	https://doi.org/10.1109/EEEI.2012.6377079
State	Published - 1 Dec 2012
Externally published	Yes
Event	2012 IEEE 27th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2012 - Eilat, Israel Duration: 14 Nov 2012 → 17 Nov 2012

Publication series

Name	2012 IEEE 27th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2012

Conference

Conference	2012 IEEE 27th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2012
Country/Territory	Israel
City	Eilat
Period	14/11/12 → 17/11/12

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

ASJC Scopus subject areas

Electrical and Electronic Engineering

Access to Document

10.1109/EEEI.2012.6377079

Cite this

@inproceedings{100b676b39e24f37802a83e3b1dbb215,

title = "Five-parameter model of photovoltaic cell based on STC data and dimensionless",

abstract = "This paper offers a novel approach of the 'singlediode' equivalent circuit model estimation, which is based on analysis of the characteristics of the solar panel supplied by the manufacturer. The method combines solution of a system of algebraic equations with optimization algorithm for extracting the seven photovoltaic module parameters of the single diode lumped circuit model. These parameters are the photocurrent, the reverse bias saturation current, the ideality factor, the series resistance, the shunt resistance, the bandgap energy, and the temperature coefficient of the photo-generating current. A minimal set of experimental data is required for parameter extraction. In many cases, the required parameters can be extracted directly from the manufacturer's data. The number of solar panels of different types of manufacturers were analyzed. All the models have been obtained from the manufacturer's data only. The precision of simulation results is about 0.1\%-0.5\% for STC.",

author = "Simon Lineykin and Moshe Averbukh and Alon Kuperman",

year = "2012",

month = dec,

day = "1",

doi = "10.1109/EEEI.2012.6377079",

language = "English",

isbn = "9781467346801",

series = "2012 IEEE 27th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2012",

booktitle = "2012 IEEE 27th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2012",

note = "2012 IEEE 27th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2012 ; Conference date: 14-11-2012 Through 17-11-2012",

}

Lineykin, S, Averbukh, M & Kuperman, A 2012, Five-parameter model of photovoltaic cell based on STC data and dimensionless. in 2012 IEEE 27th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2012., 6377079, 2012 IEEE 27th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2012, 2012 IEEE 27th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2012, Eilat, Israel, 14/11/12. https://doi.org/10.1109/EEEI.2012.6377079

Five-parameter model of photovoltaic cell based on STC data and dimensionless. / Lineykin, Simon; Averbukh, Moshe; Kuperman, Alon.
2012 IEEE 27th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2012. 2012. 6377079 (2012 IEEE 27th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2012).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Five-parameter model of photovoltaic cell based on STC data and dimensionless

AU - Lineykin, Simon

AU - Averbukh, Moshe

AU - Kuperman, Alon

PY - 2012/12/1

Y1 - 2012/12/1

N2 - This paper offers a novel approach of the 'singlediode' equivalent circuit model estimation, which is based on analysis of the characteristics of the solar panel supplied by the manufacturer. The method combines solution of a system of algebraic equations with optimization algorithm for extracting the seven photovoltaic module parameters of the single diode lumped circuit model. These parameters are the photocurrent, the reverse bias saturation current, the ideality factor, the series resistance, the shunt resistance, the bandgap energy, and the temperature coefficient of the photo-generating current. A minimal set of experimental data is required for parameter extraction. In many cases, the required parameters can be extracted directly from the manufacturer's data. The number of solar panels of different types of manufacturers were analyzed. All the models have been obtained from the manufacturer's data only. The precision of simulation results is about 0.1%-0.5% for STC.

AB - This paper offers a novel approach of the 'singlediode' equivalent circuit model estimation, which is based on analysis of the characteristics of the solar panel supplied by the manufacturer. The method combines solution of a system of algebraic equations with optimization algorithm for extracting the seven photovoltaic module parameters of the single diode lumped circuit model. These parameters are the photocurrent, the reverse bias saturation current, the ideality factor, the series resistance, the shunt resistance, the bandgap energy, and the temperature coefficient of the photo-generating current. A minimal set of experimental data is required for parameter extraction. In many cases, the required parameters can be extracted directly from the manufacturer's data. The number of solar panels of different types of manufacturers were analyzed. All the models have been obtained from the manufacturer's data only. The precision of simulation results is about 0.1%-0.5% for STC.

UR - https://www.scopus.com/pages/publications/84871995500

U2 - 10.1109/EEEI.2012.6377079

DO - 10.1109/EEEI.2012.6377079

M3 - Conference contribution

AN - SCOPUS:84871995500

SN - 9781467346801

T3 - 2012 IEEE 27th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2012

BT - 2012 IEEE 27th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2012

T2 - 2012 IEEE 27th Convention of Electrical and Electronics Engineers in Israel, IEEEI 2012

Y2 - 14 November 2012 through 17 November 2012

ER -

Five-parameter model of photovoltaic cell based on STC data and dimensionless

Abstract

Publication series

Conference

UN SDGs

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this