Impact of gear tooth surface quality on detection of local faults

I. Dadon, N. Koren, R. Klein, M. G. Lipsett, J. Bortman

Research output: Contribution to journalArticlepeer-review

8 Scopus citations

Abstract

A practical gear transmission contains surface imperfections that directly influence the vibration signature. The surface imperfections may restrict the ability to diagnose faults using vibration analysis. This study uses numerical simulation of the gear tooth surface interactions to better understand the limits of fault detection in the presence of different levels of gear imperfections. The tooth profile deviation is defined with respect to the involute profile. A dynamic model was used to simulate the vibrations of gears with different types and sizes of faults. The model takes into consideration the irregularity of the gear teeth representing a realistic system. For the purpose of verification, simulations were compared with data from a series of experiments under similar conditions. It is shown that low-precision gear profile grade reduces the ability to detect faults; however, gears with high-quality tooth surfaces allow detection of smaller faults (1.5 mm) and classification of the fault size. It is demonstrated that the model predicts correctly the detectable fault severity for a given profile precision grade. Moreover, the model estimates the distribution of results generated by profile deviations, allowing robust analysis of diagnostic capabilities.

Original languageEnglish
Article number104291
JournalEngineering Failure Analysis
Volume108
DOIs
StatePublished - 1 Jan 2020

Keywords

  • Condition monitoring
  • Dynamic model
  • Gear diagnostics
  • Profile deviations
  • Vibration

Fingerprint

Dive into the research topics of 'Impact of gear tooth surface quality on detection of local faults'. Together they form a unique fingerprint.

Cite this