Impact response of high density flexible polyurethane foam

E. Zaretsky, Z. Asaf, E. Ran, F. Aizik

Research output: Contribution to journalArticlepeer-review

46 Scopus citations

Abstract

The impact response of high density flexible polyurethane-based foam was studied in a series of symmetric (both the impactor and the sample made of the same foam) planar impact experiments, with continuous VISAR monitoring of the velocity of the rear sample surface. The impact velocities in these experiments varied from 43 to 605 m/s providing a sample compression over the 0.36-51-MPa pressure range, with the strain rates changing, respectively, from 4 × 10 3 to 6 × 10 5 s -1 . The linear shock velocity- particle velocity Hugomiot of the foam, U S = U S0 +su = 14.8 + 1.318u, was determined on the basis of the recorded velocity histories. The rise times of the velocity histories allows one to conclude that under shock compression above 3.2 MPa, the initial structure of the foam is completely crushed and the foam resistance to the propagation of the shock is determined by the void-free foam material. The dynamic tensile (spall) strength of the foam, determined in a separate impact experiment with 1-mm thick foam impactor was found equal to 0.3 MPa. Such unexpectedly low spall strength is possibly the result of substantial damage having taken place in the foam during compression.

Original languageEnglish
Pages (from-to)1-7
Number of pages7
JournalInternational Journal of Impact Engineering
Volume39
Issue number1
DOIs
StatePublished - 1 Jan 2012

Keywords

  • Crush up stress
  • Flexible foam
  • Shock compression

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Automotive Engineering
  • Aerospace Engineering
  • Safety, Risk, Reliability and Quality
  • Ocean Engineering
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Impact response of high density flexible polyurethane foam'. Together they form a unique fingerprint.

Cite this