Improving performance of spiral wound RO elements by in situ concentration polarization-enhanced radical graft polymerization

Roy Bernstein, Sofia Belfer, Viatcheslav Freger

Research output: Contribution to journalArticlepeer-review

23 Scopus citations

Abstract

In situ modification of a spiral-wound low-pressure reverse osmosis membrane for improved performance using the concentration polarization-enhanced radical graft polymerization is presented. A spiral-wound low pressure RO element (XLE, Dow-Filmtec) was converted via modification to a brackish water RO (BWRO) one by surface-grafting a sparingly soluble monomer glycidyl methacrylate, previously found to significantly improve membrane selectivity [Bernstein et al., Environ. Sci. Technol., 45 (2011) 3613]. Autopsy indicated a successful grafting throughout the element without excessive non-uniformities, close to that obtained under comparable conditions in laboratory dead-end cells. Performance tests for the modified XLE element and a commercial BWRO element (BW30, Dow-Filmtec) using natural and synthetic feed water showed a similar permeabilities of both elements but 2-4 times lower passage of salt and boron for modified element. Continuous tests that lasted for over one month showed no change in the permeability and passage of salt and boric acid. Overall, the in situ modification of the LPRO element resulted in a stable membrane, with permeability in the BWRO range but with a permeability-selectivity trade-off superior to most BWRO membranes.

Original languageEnglish
Pages (from-to)79-84
Number of pages6
JournalJournal of Membrane Science
Volume405-406
DOIs
StatePublished - 1 Jul 2012

Keywords

  • Boric acid
  • Membrane modification
  • Polyamide reverse osmosis membrane
  • Spiral-wound element

Fingerprint

Dive into the research topics of 'Improving performance of spiral wound RO elements by in situ concentration polarization-enhanced radical graft polymerization'. Together they form a unique fingerprint.

Cite this