Modeling radium distribution in coastal aquifers during sea level changes: The Dead Sea case

We present a new approach to studying the behavior of radium isotopes in a coastal aquifer. In order to simulate radium isotope distributions in the dynamic flow field of the Dead Sea aquifer, a multi-species density dependent flow model (SUTRA-MS) was used. Field data show that the activity of ²²⁶Ra decreases from 140 to 60dpm/L upon entering the aquifer from the Dead Sea, and then further decreases linearly due to mixing with Ra-poor fresh water. On the other hand, an increase is observed in the activity of the shorter-lived isotopes (up to 52dpm/L ²²⁴Ra and 31dpm/L ²²³Ra), which are relatively low in Dead Sea water (up to 2.5dpm/L ²²⁴Ra and 0.5dpm/L ²²³Ra). The activities of the short lived radium isotopes also decrease with decreasing salinity, which is due to the effect of salinity on the adsorption of radium. The relationship between ²²⁴Ra and salinity suggests that the adsorption partition coefficient (K) is linearly related to salinity. Simulations of the steady-state conditions, show that the distance where equilibrium activity is attained for each radium isotope is affected by the isotope half-life, K and the groundwater velocity, resulting in a longer distance for the long-lived radium isotopes. K affects the radium distribution in transient conditions, especially that of the long-lived radium isotopes. The transient conditions in the Dead Sea system, with a 1m/yr lake level drop, together with the radium field data, constrains K to be relatively low (<10). Thus, the sharp decrease in ²²⁶Ra cannot be explained by adsorption, and it is better explained by removal via coprecipitation, probably with barite or celestine.