Oversampling advances in millimeter-wave scan imaging using inexpensive neon indicator lamp detectors

Assaf Levanon, Natan S. Kopeika, Yitzhak Yitzhaky, Amir Abramovich, Daniel Rozban, Hezi Joseph, Avihai Aharon, Alex Belenky, Michael Gefen, Orly Yadid-Pecht

Research output: Contribution to journalArticlepeer-review

7 Scopus citations

Abstract

In recent years, much effort has been invested to develop room temperature inexpensive, but sensitive, millimeter wave (MMW) and terahertz (THz) detectors that can be used as pixels in focal plane arrays, which is important for real-time imaging. A new 18 x 2 neon indicator lamp MMW/THz scanner was developed. The components of the camera include horizontally shifted two-column glow discharge detectors in a scanning array. The detectors, costing about 50 cents each, are wired to a preprocessing card, a VLSI board, and a motor for scanner movement. A description of the VLSI Verilog programmable hardware of the new scanner, the physical architecture, the software user interface, and imaging results at 97 GHz are presented. At this stage, the emphasis is focused on the lamp exposure time and spatial resolution when the scanning is performed horizontally. In the future it is planned to expose all pixels simultaneously for real-time imaging. New software capabilities allow the application of digital image enhancement algorithms. Fast scanning permits obtaining images in 1 to 5 s. Oversampling yields a sharper edge response and a higher signal-to-noise ratio.

Original languageEnglish
Article number063202
JournalOptical Engineering
Volume52
Issue number6
DOIs
StatePublished - 1 Jan 2013

Keywords

  • far-infrared
  • millimeter wave detectors
  • millimeter wave image processing
  • millimeter wave imaging
  • plasma

Fingerprint

Dive into the research topics of 'Oversampling advances in millimeter-wave scan imaging using inexpensive neon indicator lamp detectors'. Together they form a unique fingerprint.

Cite this