Performance of diode-end-pumped Cr4+, Nd3+:YAG self-Q-switched and Nd:YAG/Cr4+:YAG diffusion bonded lasers

Yehoshua Kalisky, Leonid Kravchik, Milan R. Kokta

Research output: Contribution to journalArticlepeer-review

36 Scopus citations

Abstract

Self-passively Q-switching of a diode-pumped Cr,Nd:YAG, where the Cr 4+ is used as a saturable absorber for the 1064 nm laser emission is reported. The maximum average output power was obtained using an output coupler of R=86%. The self-Q-switched diode pumped laser yielded 1.86-W average output power with low threshold pumping power (≈1.7-W), average slope efficiency of ≈34%, pulse duration of about 14-16 ns, and modulation frequency ranging from 2.4 to 73 kHz, depending on the input pumping power. These results are the highest reported for self-Q-switched lasers. Higher slope efficiency (42%) and shorter Q-switched pulses were obtained for a Q-switched Nd:YAG/Cr 4+:YAG diffusion bonded laser. A comparison of the codoped Cr,Nd:YAG laser performance, with that of a diffusion bonded laser is reported and analyzed.

Original languageEnglish
Pages (from-to)607-614
Number of pages8
JournalOptical Materials
Volume24
Issue number4
DOIs
StatePublished - 1 Jan 2004
Externally publishedYes

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Atomic and Molecular Physics, and Optics
  • Spectroscopy
  • Physical and Theoretical Chemistry
  • Organic Chemistry
  • Inorganic Chemistry
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Performance of diode-end-pumped Cr4+, Nd3+:YAG self-Q-switched and Nd:YAG/Cr4+:YAG diffusion bonded lasers'. Together they form a unique fingerprint.

Cite this