Plasma polymerized thiophene: Molecular structure and electrical properties

M. S. Silverstein, I. Visoly-Fisher

Research output: Contribution to journalArticlepeer-review

42 Scopus citations

Abstract

Polythiophene (PTh) is of interest for transistors, light emitting diodes and sensors. Plasma polymerization is a solvent-free, room temperature process that can be used to rapidly deposit thin polymer films onto a wide variety of substrates. This paper describes the synthesis of plasma polymerized thiophene (PPTh) and the dependence of molecular structure and properties on the polymerization conditions. Transparent plasma polymerized thiophene films, deposited at about 50 nm min-1, had a density of about 1.75 g cc-1, depending on the carrier gas used (if any) and on the plasma power. The molecular structure consisted of opened thiophene rings and included significant amounts of unsaturation, oxygen and nitrogen. When nitrogen was used as a carrier gas at a low power or when a high power was used (with no carrier gas), there was significantly more oxygen, nitrogen, and sulfur-oxygen bonds. When a high power was used, the films exhibited a higher polar component of surface tension and a higher internal stress. The undoped films exhibited non-linear current-voltage (IV) behavior typical of Schottky metal-semiconductor barriers with breakdown at reverse bias. Iodine doping yielded ohmic IV behavior, perhaps reflecting the formation of a conducting iodine percolation network.

Original languageEnglish
Pages (from-to)11-20
Number of pages10
JournalPolymer
Volume43
Issue number1
DOIs
StatePublished - 12 Oct 2001
Externally publishedYes

Keywords

  • Plasma polymerization
  • Polythiophene
  • Thin films

ASJC Scopus subject areas

  • Organic Chemistry
  • Polymers and Plastics
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Plasma polymerized thiophene: Molecular structure and electrical properties'. Together they form a unique fingerprint.

Cite this