Power management architecture for universal input Ac-Dc adapter support in battery powered applications

S. M. Ahsanuzzaman; Justin Blackman; Mor M. Peretz; Aleksandar Prodic

doi:10.1109/EPE.2013.6632009

Power management architecture for universal input Ac-Dc adapter support in battery powered applications

S. M. Ahsanuzzaman
, Justin Blackman
, Mor M. Peretz
, Aleksandar Prodic

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

Abstract

This paper introduces a novel power management architecture for battery powered portable applications, where ac-dc power adapters are used to charge the battery. The flyback-based system allows independent regulation of output bus voltage, irrespective of adapter output, and battery cell voltages. This architecture creates the flexibility to use a wide range of adapters to power the device while charging the battery cells. The effectiveness of the introduced architecture is verified on a 20-W, 100 kHz experimental prototype. Experimental results demonstrate tight output bus voltage regulation over a wide range of adapter-provided dc inputs and smooth transitions between adapter and battery powered modes of operation.

Original language	English
Title of host publication	2013 15th European Conference on Power Electronics and Applications, EPE 2013
DOIs	https://doi.org/10.1109/EPE.2013.6632009
State	Published - 17 Dec 2013
Externally published	Yes
Event	2013 15th European Conference on Power Electronics and Applications, EPE 2013 - Lille, France Duration: 2 Sep 2013 → 6 Sep 2013

Publication series

Name	2013 15th European Conference on Power Electronics and Applications, EPE 2013

Conference

Conference	2013 15th European Conference on Power Electronics and Applications, EPE 2013
Country/Territory	France
City	Lille
Period	2/09/13 → 6/09/13

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Converter circuit
DC power supply
High frequency power converter
Power management
Switched-mode power supply

ASJC Scopus subject areas

Energy Engineering and Power Technology
Fuel Technology
Electrical and Electronic Engineering

Access to Document

10.1109/EPE.2013.6632009

Cite this

Ahsanuzzaman, S. M., Blackman, J., Peretz, M. M., & Prodic, A. (2013). Power management architecture for universal input Ac-Dc adapter support in battery powered applications. In 2013 15th European Conference on Power Electronics and Applications, EPE 2013 Article 6632009 (2013 15th European Conference on Power Electronics and Applications, EPE 2013). https://doi.org/10.1109/EPE.2013.6632009

@inproceedings{eb83839d2ba249bf9c7a4a094335f2cc,

title = "Power management architecture for universal input Ac-Dc adapter support in battery powered applications",

abstract = "This paper introduces a novel power management architecture for battery powered portable applications, where ac-dc power adapters are used to charge the battery. The flyback-based system allows independent regulation of output bus voltage, irrespective of adapter output, and battery cell voltages. This architecture creates the flexibility to use a wide range of adapters to power the device while charging the battery cells. The effectiveness of the introduced architecture is verified on a 20-W, 100 kHz experimental prototype. Experimental results demonstrate tight output bus voltage regulation over a wide range of adapter-provided dc inputs and smooth transitions between adapter and battery powered modes of operation.",

keywords = "Converter circuit, DC power supply, High frequency power converter, Power management, Switched-mode power supply",

author = "Ahsanuzzaman, \{S. M.\} and Justin Blackman and Peretz, \{Mor M.\} and Aleksandar Prodic",

year = "2013",

month = dec,

day = "17",

doi = "10.1109/EPE.2013.6632009",

language = "English",

isbn = "9781479901166",

series = "2013 15th European Conference on Power Electronics and Applications, EPE 2013",

booktitle = "2013 15th European Conference on Power Electronics and Applications, EPE 2013",

note = "2013 15th European Conference on Power Electronics and Applications, EPE 2013 ; Conference date: 02-09-2013 Through 06-09-2013",

}

Ahsanuzzaman, SM, Blackman, J, Peretz, MM & Prodic, A 2013, Power management architecture for universal input Ac-Dc adapter support in battery powered applications. in 2013 15th European Conference on Power Electronics and Applications, EPE 2013., 6632009, 2013 15th European Conference on Power Electronics and Applications, EPE 2013, 2013 15th European Conference on Power Electronics and Applications, EPE 2013, Lille, France, 2/09/13. https://doi.org/10.1109/EPE.2013.6632009

Power management architecture for universal input Ac-Dc adapter support in battery powered applications. / Ahsanuzzaman, S. M.; Blackman, Justin; Peretz, Mor M. et al.
2013 15th European Conference on Power Electronics and Applications, EPE 2013. 2013. 6632009 (2013 15th European Conference on Power Electronics and Applications, EPE 2013).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Power management architecture for universal input Ac-Dc adapter support in battery powered applications

AU - Ahsanuzzaman, S. M.

AU - Blackman, Justin

AU - Peretz, Mor M.

AU - Prodic, Aleksandar

PY - 2013/12/17

Y1 - 2013/12/17

N2 - This paper introduces a novel power management architecture for battery powered portable applications, where ac-dc power adapters are used to charge the battery. The flyback-based system allows independent regulation of output bus voltage, irrespective of adapter output, and battery cell voltages. This architecture creates the flexibility to use a wide range of adapters to power the device while charging the battery cells. The effectiveness of the introduced architecture is verified on a 20-W, 100 kHz experimental prototype. Experimental results demonstrate tight output bus voltage regulation over a wide range of adapter-provided dc inputs and smooth transitions between adapter and battery powered modes of operation.

AB - This paper introduces a novel power management architecture for battery powered portable applications, where ac-dc power adapters are used to charge the battery. The flyback-based system allows independent regulation of output bus voltage, irrespective of adapter output, and battery cell voltages. This architecture creates the flexibility to use a wide range of adapters to power the device while charging the battery cells. The effectiveness of the introduced architecture is verified on a 20-W, 100 kHz experimental prototype. Experimental results demonstrate tight output bus voltage regulation over a wide range of adapter-provided dc inputs and smooth transitions between adapter and battery powered modes of operation.

KW - Converter circuit

KW - DC power supply

KW - High frequency power converter

KW - Power management

KW - Switched-mode power supply

UR - https://www.scopus.com/pages/publications/84890196928

U2 - 10.1109/EPE.2013.6632009

DO - 10.1109/EPE.2013.6632009

M3 - Conference contribution

AN - SCOPUS:84890196928

SN - 9781479901166

T3 - 2013 15th European Conference on Power Electronics and Applications, EPE 2013

BT - 2013 15th European Conference on Power Electronics and Applications, EPE 2013

T2 - 2013 15th European Conference on Power Electronics and Applications, EPE 2013

Y2 - 2 September 2013 through 6 September 2013

ER -

Power management architecture for universal input Ac-Dc adapter support in battery powered applications

Abstract

Publication series

Conference

UN SDGs

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this