Primary investigation of anodized aluminium as a substrate for hybrid microelectronics Part 2. Behaviour of thick film circuit components

M. A. Slonim; I. Smit; J. D. Van Wyk

doi:10.1080/00207219008920336

Primary investigation of anodized aluminium as a substrate for hybrid microelectronics Part 2. Behaviour of thick film circuit components

M. A. Slonim, I. Smit, J. D. Van Wyk

Department of Electrical & Computer Engineering

Research output: Contribution to journal › Article › peer-review

Abstract

The analysis is treated of the transient and steady-state processes in a high frequency resonant circuit that may be used, for example, as a high frequency sriubber at the input terminals of a voltage fed converter. Sets of differential and difference equations governing the transient and steady-state processes are found and solved. The solution is obtained in closed form. Theoretical and experimental results, both for transient and steady-state conditions, are compared and satisfactory agreement shown.

Original language	English
Pages (from-to)	527-537
Number of pages	11
Journal	International Journal of Electronics
Volume	69
Issue number	4
DOIs	https://doi.org/10.1080/00207219008920336
State	Published - 1 Jan 1990

ASJC Scopus subject areas

Electrical and Electronic Engineering

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1080/00207219008920336

Cite this

@article{0a48db43d6534f42ac621b4a62b9286c,

title = "Primary investigation of anodized aluminium as a substrate for hybrid microelectronics Part 2. Behaviour of thick film circuit components",

abstract = "The analysis is treated of the transient and steady-state processes in a high frequency resonant circuit that may be used, for example, as a high frequency sriubber at the input terminals of a voltage fed converter. Sets of differential and difference equations governing the transient and steady-state processes are found and solved. The solution is obtained in closed form. Theoretical and experimental results, both for transient and steady-state conditions, are compared and satisfactory agreement shown.",

author = "Slonim, {M. A.} and I. Smit and {Van Wyk}, {J. D.}",

note = "Funding Information: ACKNOWLEDGMENT The authors thank the Foundation for Research and Development of the Council for Scientific and Industrial Research of the Republic of South Africa for its",

year = "1990",

month = jan,

day = "1",

doi = "10.1080/00207219008920336",

language = "English",

volume = "69",

pages = "527--537",

journal = "International Journal of Electronics",

issn = "0020-7217",

publisher = "Taylor and Francis Ltd.",

number = "4",

}

TY - JOUR

T1 - Primary investigation of anodized aluminium as a substrate for hybrid microelectronics Part 2. Behaviour of thick film circuit components

AU - Slonim, M. A.

AU - Smit, I.

AU - Van Wyk, J. D.

N1 - Funding Information: ACKNOWLEDGMENT The authors thank the Foundation for Research and Development of the Council for Scientific and Industrial Research of the Republic of South Africa for its

PY - 1990/1/1

Y1 - 1990/1/1

N2 - The analysis is treated of the transient and steady-state processes in a high frequency resonant circuit that may be used, for example, as a high frequency sriubber at the input terminals of a voltage fed converter. Sets of differential and difference equations governing the transient and steady-state processes are found and solved. The solution is obtained in closed form. Theoretical and experimental results, both for transient and steady-state conditions, are compared and satisfactory agreement shown.

AB - The analysis is treated of the transient and steady-state processes in a high frequency resonant circuit that may be used, for example, as a high frequency sriubber at the input terminals of a voltage fed converter. Sets of differential and difference equations governing the transient and steady-state processes are found and solved. The solution is obtained in closed form. Theoretical and experimental results, both for transient and steady-state conditions, are compared and satisfactory agreement shown.

UR - http://www.scopus.com/inward/record.url?scp=0025499819&partnerID=8YFLogxK

U2 - 10.1080/00207219008920336

DO - 10.1080/00207219008920336

M3 - Article

AN - SCOPUS:0025499819

SN - 0020-7217

VL - 69

SP - 527

EP - 537

JO - International Journal of Electronics

JF - International Journal of Electronics

IS - 4

ER -

Primary investigation of anodized aluminium as a substrate for hybrid microelectronics Part 2. Behaviour of thick film circuit components

Abstract

ASJC Scopus subject areas

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this