Requirements for the industrial application of superconducting rotating electrical machines

I. Vajda; A. Szalay; N. Göbl; V. Meerovich; V. Sokolovsky

doi:10.1109/77.783521

Requirements for the industrial application of superconducting rotating electrical machines

I. Vajda, A. Szalay, N. Göbl, V. Meerovich, V. Sokolovsky

Department of Physics

Research output: Contribution to journal › Article › peer-review

7 Scopus citations

Abstract

The objective of the project reported in the paper is the design and construction of an experimental high Tc (HTS) synchronous machine. The machine is excited with rare-earth permanent magnets on the rotor and rod-shaped armature conductors on the stator. The machine incorporates Bi-based HTS conductors supplied with electrical contacts. In the design procedure a special attention has been paid to the considerations regarding industrial applications of HTS rotating electrical machines both in motor and generator modes of operation. Possible applications have been analyzed to formulate the requirements for the machine to be applied and calculations have been performed to check how the above requirements can be met by HTS machines. Comparisons have been made between conventional and HTS machines designed for particular practical cases..

Original language	English
Pages (from-to)	1225-1228
Number of pages	4
Journal	IEEE Transactions on Applied Superconductivity
Volume	9
Issue number	2 PART 1
DOIs	https://doi.org/10.1109/77.783521
State	Published - 1 Dec 1999

ASJC Scopus subject areas

Electronic, Optical and Magnetic Materials
Condensed Matter Physics
Electrical and Electronic Engineering

Access to Document

10.1109/77.783521

Cite this

@article{2f63e0e1844b40d2b5a044cbf8362dd5,

title = "Requirements for the industrial application of superconducting rotating electrical machines",

abstract = "The objective of the project reported in the paper is the design and construction of an experimental high Tc (HTS) synchronous machine. The machine is excited with rare-earth permanent magnets on the rotor and rod-shaped armature conductors on the stator. The machine incorporates Bi-based HTS conductors supplied with electrical contacts. In the design procedure a special attention has been paid to the considerations regarding industrial applications of HTS rotating electrical machines both in motor and generator modes of operation. Possible applications have been analyzed to formulate the requirements for the machine to be applied and calculations have been performed to check how the above requirements can be met by HTS machines. Comparisons have been made between conventional and HTS machines designed for particular practical cases..",

author = "I. Vajda and A. Szalay and N. G{\"o}bl and V. Meerovich and V. Sokolovsky",

note = "Funding Information: Manuscnpt received 13 Septemher 1998 IX istvan Vajda, {\textquoteleft}Technical llniversity of Budapest, phone: *.IO- 1-463 296 I fax.+?6-1-4633 600. email. [email protected] bme.hu. This \rork was supponed in part bv the National Scientific Fund tllungary) contract No T022513. and by the Ministry of Culture and I.{\textquoteright}ducaiion( 1 lungan) contract Nos FKFP0247/1997 and PFP07WI 997",

year = "1999",

month = dec,

day = "1",

doi = "10.1109/77.783521",

language = "English",

volume = "9",

pages = "1225--1228",

journal = "IEEE Transactions on Applied Superconductivity",

issn = "1051-8223",

publisher = "Institute of Electrical and Electronics Engineers",

number = "2 PART 1",

}

TY - JOUR

T1 - Requirements for the industrial application of superconducting rotating electrical machines

AU - Vajda, I.

AU - Szalay, A.

AU - Göbl, N.

AU - Meerovich, V.

AU - Sokolovsky, V.

N1 - Funding Information: Manuscnpt received 13 Septemher 1998 IX istvan Vajda, ‘Technical llniversity of Budapest, phone: *.IO- 1-463 296 I fax.+?6-1-4633 600. email. [email protected] bme.hu. This \rork was supponed in part bv the National Scientific Fund tllungary) contract No T022513. and by the Ministry of Culture and I.’ducaiion( 1 lungan) contract Nos FKFP0247/1997 and PFP07WI 997

PY - 1999/12/1

Y1 - 1999/12/1

N2 - The objective of the project reported in the paper is the design and construction of an experimental high Tc (HTS) synchronous machine. The machine is excited with rare-earth permanent magnets on the rotor and rod-shaped armature conductors on the stator. The machine incorporates Bi-based HTS conductors supplied with electrical contacts. In the design procedure a special attention has been paid to the considerations regarding industrial applications of HTS rotating electrical machines both in motor and generator modes of operation. Possible applications have been analyzed to formulate the requirements for the machine to be applied and calculations have been performed to check how the above requirements can be met by HTS machines. Comparisons have been made between conventional and HTS machines designed for particular practical cases..

AB - The objective of the project reported in the paper is the design and construction of an experimental high Tc (HTS) synchronous machine. The machine is excited with rare-earth permanent magnets on the rotor and rod-shaped armature conductors on the stator. The machine incorporates Bi-based HTS conductors supplied with electrical contacts. In the design procedure a special attention has been paid to the considerations regarding industrial applications of HTS rotating electrical machines both in motor and generator modes of operation. Possible applications have been analyzed to formulate the requirements for the machine to be applied and calculations have been performed to check how the above requirements can be met by HTS machines. Comparisons have been made between conventional and HTS machines designed for particular practical cases..

UR - http://www.scopus.com/inward/record.url?scp=0032664149&partnerID=8YFLogxK

U2 - 10.1109/77.783521

DO - 10.1109/77.783521

M3 - Article

AN - SCOPUS:0032664149

SN - 1051-8223

VL - 9

SP - 1225

EP - 1228

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

IS - 2 PART 1

ER -

Requirements for the industrial application of superconducting rotating electrical machines

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this