Research and development for shrouded wind turbines

In order to exploit wind power as economically as possible, it was suggested that the wind turbine should be enclosed inside a specially designed shroud. Various geometries are discussed; it is shown that with a fairly compact shroud a significant power augmentation can be achieved. For improving the shroud performance, the use of a ring-shaped flap or boundary layer control technique is introduced. It is shown that up to 80% improvement in the shroud power augmentation can be obtained by the use of an appropriate ring-shaped flap while proper bleeding of the shroud's external flow into its inner rear part will increase its power augmentation by about 25%. The present review also discussed the design and performance of an axial flow turbine which is the most suitable for the proposed shrouds. It is shown that such a turbine produces a fairly stable output for varying wind speeds while exhibiting a fairly high efficiency. Based on the reported research with shrouds, a pilot plant producing 1 hp at 5 m/s with a 3 m dia. turbine was built. Its design and preliminary field test results are also included in the review.