Retrospective dosimetry using unheated quartz: A feasibility study

K. J. Thomsen, L. Bøtter-Jensen, A. S. Murray, S. Solongo, Y. S. Horowitz, L. Oster

Research output: Contribution to journalArticlepeer-review

28 Scopus citations

Abstract

Most attempts to apply retrospective dosimetry to building materials have made use of heated (sensitised) items such as brick or tile ceramic. Unfired materials, such as concrete, are far more widespread in the industrial environment, but unfortunately these cannot be assumed to contain a negligible dose at the time of construction. This paper reports on preliminary attempts to measure, using optically stimulated luminescence (OSL), a dose-depth profile in a new concrete brick which had been given a known dose in the laboratory. The dose distribution in individual samples was measured before and after irradiation using small aliquots each of 65 quartz grains, and also using single grains, extracted from the concrete. Despite the material being very poorly zeroed prior to irradiation, both approaches gave satisfactory results and it is concluded that measurement of individual grains from poorly zeroed building materials can provide useful information on accident doses.

Original languageEnglish
Pages (from-to)345-348
Number of pages4
JournalRadiation Protection Dosimetry
Volume101
Issue number1-4
DOIs
StatePublished - 1 Jan 2002

Fingerprint

Dive into the research topics of 'Retrospective dosimetry using unheated quartz: A feasibility study'. Together they form a unique fingerprint.

Cite this