Sequential Ammonia and Carbon Dioxide Adsorption on Pyrolyzed Biomass to Recover Waste Stream Nutrients

The amine-rich surfaces of pyrolyzed human solid waste (py-HSW) can be "primed"or "regenerated"with carbon dioxide (CO2) to enhance their adsorption of ammonia (NH3) for use as a soil amendment. To better understand the mechanism by which CO2 exposure facilitates NH3 adsorption to py-HSW, we artificially enriched a model sorbent, pyrolyzed, oxidized wood (py-ox wood) with amine functional groups through exposure to NH3. We then exposed these N-enriched materials to CO2 and then resorbed NH3. The high heat of CO2 adsorption (Qst) on py-HSW, 49 kJ mol-1, at low surface coverage, 0.4 mmol CO2 g-1, showed that the naturally occurring N compounds in py-HSW have a high affinity for CO2. The Qst of CO2 on py-ox wood also increased after exposure to NH3, reaching 50 kJ mol-1 at 0.7 mmol CO2 g-1, demonstrating that the incorporation of N-rich functional groups by NH3 adsorption is favorable for CO2 uptake. Adsorption kinetics of py-ox wood revealed continued, albeit diminishing NH3 uptake after each CO2 treatment, averaging 5.9 mmol NH3 g-1 for the first NH3 exposure event and 3.5 and 2.9 mmol NH3 g-1 for the second and third; the electrophilic character of CO2 serves as a Lewis acid, enhancing surface affinity for NH3 uptake. Furthermore, penetration of 15NH3 and 13CO2 measured by NanoSIMS reached over 7 μm deep into both materials, explaining the large NH3 capture. We expected similar NH3 uptake in py-HSW sorbed with CO2 and py-ox wood because both materials, py-HSW and py-ox wood sorbed with NH3, had similar N contents and similarly high CO2 uptake. Yet NH3 sorption in py-HSW was unexpectedly low, apparently from potassium (K) bicarbonate precipitation, reducing interactions between NH3 and sorbed CO2; 2-fold greater surface K in py-HSW was detected after exposure to CO2 and NH3 than before gas exposure. We show that amine-rich pyrolyzed waste materials have high CO2 affinity, which facilitates NH3 uptake. However, high ash contents as found in py-HSW hinder this mechanism.