Setting behavior of blended cement with limestone: influence of particle size and content

Yaniv Knop, Alva Peled

Research output: Contribution to journalArticlepeer-review

26 Scopus citations

Abstract

The combined effects of particle size, surface area, and limestone content on the properties of blended cement with limestone were studied. Limestone powders with six different particle diameters and surface areas relative to the cement particles were tested: two sizes smaller with greater surface area, two sizes larger with less surface area, and two sizes similar to the original cement particle. Two systems were studied: blended cement with limestone consisting of one particle size distribution and limestone consisting of a combination of three particle sizes. The setting history and hydration degree were examined using a Vicat needle apparatus and performing Rietveld quantitative phase analysis of X-ray diffraction. The packing density of the different pastes was calculated based on the amount of water required for normal consistency. It was shown that the properties of blended cements with different particle sizes were affected significantly by two mechanisms: nucleation and packing density. These two mechanisms affected the chemical and physical properties of the blended cement by altering its setting rates.

Original languageEnglish
Pages (from-to)439-452
Number of pages14
JournalMaterials and Structures/Materiaux et Constructions
Volume49
Issue number1-2
DOIs
StatePublished - 1 Jan 2016

Keywords

  • Blended cement
  • Hydration degree
  • Limestone
  • Packing density

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Building and Construction
  • Materials Science (all)
  • Mechanics of Materials

Fingerprint

Dive into the research topics of 'Setting behavior of blended cement with limestone: influence of particle size and content'. Together they form a unique fingerprint.

Cite this