Threshold voltage for purely flexoelectric deformations of conducting homeotropic nematic layers

Elastic deformations induced by an electric field in homeotropic nematic layers with finite anchoring energy were studied numerically. A nematic material possessing flexoelectric properties and characterized by a positive dielectric anisotropy was considered. The ionic space charge and the ion transport across the layer were taken into account. The director orientation, the electric field strength and the ion concentrations were calculated as functions of the coordinate normal to the layer. The calculations show that the electric field distribution, which determines the form of the deformations, is influenced by the ionic current and therefore depends on the ionic content and on the properties of the electrodes. Several types of deformations were distinguished. When the electrode contacts are well conducting or when the ionic content is low, the threshold voltage is very close to the value U f valid for an insulating nematic. When the electrodes are poorly conducting or blocking at high ion concentration, the threshold voltage decreases much below U f. At moderate ion concentrations, i.e. between 1019 and 1020 m-3, two different behaviours were found depending on the sign of the sum of flexoelectric coefficients e 11+e 33. In the case of e 11+e 33<0, the threshold voltage decreases with the ionic content; in the case of e 11+e 33>0, the deformations occur in two separate voltage regimes. They arise above a certain threshold voltage, disappear at some higher voltage and reappear at an even higher threshold.