Skip to main navigation Skip to search Skip to main content

Toward a plug-and-play approach for active power factor correction

Research output: Contribution to journal › Article › peer-review

Abstract

The feasibility of producing a modular Active Power Factor Correction (APFC) system was studied analytically and experimentally. It is shown that the novel control scheme that does not need the sensing of the input voltage is highly compatible with the modular, plug-and-play concept. Modularity is achieved by aggregating practically all the electronics in an IC or hybrid unit that may also include the power switch. This unit plus a line rectifier, inductor and bus capacitor are all that it takes to form an APFC system. It is demonstrated that dynamic stability is assured by the proposed inherent robust control method. This plug-and-play solution will greatly simplify and reduce the cost of the design and manufacturing of APFC front ends.

Original languageEnglish
Pages (from-to)599-612
Number of pages14
JournalJournal of Circuits, Systems and Computers
Volume13
Issue number3
DOIs
StatePublished - 1 Jun 2004

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 9 - Industry, Innovation, and Infrastructure
    SDG 9 Industry, Innovation, and Infrastructure

Keywords

  • Modular approach
  • Plug-and-play
  • Power factor
  • Smart power

ASJC Scopus subject areas

  • Hardware and Architecture
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Toward a plug-and-play approach for active power factor correction'. Together they form a unique fingerprint.

Cite this