Wearable antennas design for wireless communication

Pavel Schilingovski; Vladimir Vulfin; Shai Sayfan-Altman; Reuven Shavit

doi:10.1109/COMCAS.2017.8244796

Wearable antennas design for wireless communication

Pavel Schilingovski
, Vladimir Vulfin
, Shai Sayfan-Altman
, Reuven Shavit

Department of Electrical & Computer Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

17 Scopus citations

Abstract

In this paper, we present a wearable antenna design, for Bluetooth/WiFi communication. The proposed antenna is embedded in jeans garment using conductive fabric. Four Bluetooth wearable antennas were installed on a human body. Also, an antenna for hearing AIDS device was designed and simulated. The S parameters of the antennas system, gain and specific absorption rate (SAR) were calculated.

Original language	English
Title of host publication	2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017
Publisher	Institute of Electrical and Electronics Engineers
Pages	1-3
Number of pages	3
ISBN (Electronic)	9781538631690
DOIs	https://doi.org/10.1109/COMCAS.2017.8244796
State	Published - 28 Jun 2017
Event	2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017 - Tel-Aviv, Israel Duration: 13 Nov 2017 → 15 Nov 2017

Publication series

Name	2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017
Volume	2017-November

Conference

Conference	2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017
Country/Territory	Israel
City	Tel-Aviv
Period	13/11/17 → 15/11/17

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 3 Good Health and Well-being

Keywords

Antenna on jeans
Conductive garment
Wearable antenna

ASJC Scopus subject areas

Radiation
Computer Networks and Communications
Electrical and Electronic Engineering

Access to Document

10.1109/COMCAS.2017.8244796

Cite this

Schilingovski, P., Vulfin, V., Sayfan-Altman, S., & Shavit, R. (2017). Wearable antennas design for wireless communication. In 2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017 (pp. 1-3). (2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017; Vol. 2017-November). Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/COMCAS.2017.8244796

Schilingovski, Pavel ; Vulfin, Vladimir ; Sayfan-Altman, Shai et al. / Wearable antennas design for wireless communication. 2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017. Institute of Electrical and Electronics Engineers, 2017. pp. 1-3 (2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017).

@inproceedings{a255f82a23f049b78508b4a4e5846710,

title = "Wearable antennas design for wireless communication",

abstract = "In this paper, we present a wearable antenna design, for Bluetooth/WiFi communication. The proposed antenna is embedded in jeans garment using conductive fabric. Four Bluetooth wearable antennas were installed on a human body. Also, an antenna for hearing AIDS device was designed and simulated. The S parameters of the antennas system, gain and specific absorption rate (SAR) were calculated.",

keywords = "Antenna on jeans, Conductive garment, Wearable antenna",

author = "Pavel Schilingovski and Vladimir Vulfin and Shai Sayfan-Altman and Reuven Shavit",

note = "Publisher Copyright: {\textcopyright} 2017 IEEE.; 2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017 ; Conference date: 13-11-2017 Through 15-11-2017",

year = "2017",

month = jun,

day = "28",

doi = "10.1109/COMCAS.2017.8244796",

language = "English",

series = "2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017",

publisher = "Institute of Electrical and Electronics Engineers",

pages = "1--3",

booktitle = "2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017",

address = "United States",

}

Schilingovski, P, Vulfin, V, Sayfan-Altman, S & Shavit, R 2017, Wearable antennas design for wireless communication. in 2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017. 2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017, vol. 2017-November, Institute of Electrical and Electronics Engineers, pp. 1-3, 2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017, Tel-Aviv, Israel, 13/11/17. https://doi.org/10.1109/COMCAS.2017.8244796

Wearable antennas design for wireless communication. / Schilingovski, Pavel; Vulfin, Vladimir; Sayfan-Altman, Shai et al.
2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017. Institute of Electrical and Electronics Engineers, 2017. p. 1-3 (2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017; Vol. 2017-November).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Wearable antennas design for wireless communication

AU - Schilingovski, Pavel

AU - Vulfin, Vladimir

AU - Sayfan-Altman, Shai

AU - Shavit, Reuven

PY - 2017/6/28

Y1 - 2017/6/28

N2 - In this paper, we present a wearable antenna design, for Bluetooth/WiFi communication. The proposed antenna is embedded in jeans garment using conductive fabric. Four Bluetooth wearable antennas were installed on a human body. Also, an antenna for hearing AIDS device was designed and simulated. The S parameters of the antennas system, gain and specific absorption rate (SAR) were calculated.

AB - In this paper, we present a wearable antenna design, for Bluetooth/WiFi communication. The proposed antenna is embedded in jeans garment using conductive fabric. Four Bluetooth wearable antennas were installed on a human body. Also, an antenna for hearing AIDS device was designed and simulated. The S parameters of the antennas system, gain and specific absorption rate (SAR) were calculated.

KW - Antenna on jeans

KW - Conductive garment

KW - Wearable antenna

UR - https://www.scopus.com/pages/publications/85045854314

U2 - 10.1109/COMCAS.2017.8244796

DO - 10.1109/COMCAS.2017.8244796

M3 - Conference contribution

AN - SCOPUS:85045854314

T3 - 2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017

SP - 1

EP - 3

BT - 2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017

PB - Institute of Electrical and Electronics Engineers

T2 - 2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017

Y2 - 13 November 2017 through 15 November 2017

ER -

Schilingovski P, Vulfin V, Sayfan-Altman S, Shavit R. Wearable antennas design for wireless communication. In 2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017. Institute of Electrical and Electronics Engineers. 2017. p. 1-3. (2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems, COMCAS 2017). doi: 10.1109/COMCAS.2017.8244796

Wearable antennas design for wireless communication

Abstract

Publication series

Conference

UN SDGs

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this